Scanning for hardware & selecting your PRS Clicker database
|
|
Article ID: 97
Last updated: 07 Jan, 2009
|
|
|
|
Views: 361
|
|
Posted: 07 Jan, 2009
by: Woods B.
Updated: 07 Jan, 2009
by: Woods B.
|
|
- Double click on the Interwrite Response shortcut on the desktop (or go to Start → Programs → Interwrite Learning → Interwrite Response → Response).
- Under “What do you want to do?”, select the Setup My Hardware button.
- In the left hand column, be sure Receivers is selected and select Scan Ports.
- Once it has finished scanning ports, Response IR Receiver should be Enabled. Click the Close button.
 
- Under “Select Database”, click Open and browse for your database file (e.g. M:\PRS\spring2009.prs) file. Do this even if your database appears in the drop down window. **NOTE – if using a flash drive, be sure to insert your flash drive first**
|
